GUST
GUST computes steady-state wind fields in the atmospheric boundary layer (ABL) over complex terrain. It solves the steady Reynolds-averaged Navier–Stokes (RANS) equations with a one-equation k–L turbulence model on a terrain-following mesh. It is a stand-alone AMReX application and runs on CPUs and GPUs. GUST stands for Grid-sequenced Unified Steady Terrain solver; it was called ablsteady until October 2026.
A transient ABL code such as ERF reaches a steady wind field by integrating in time for many hours of simulated flow. GUST solves for the steady state directly. It drives the residual of the steady equations to zero with a pseudo-time iteration, and accelerates the iteration with line solvers, a good initial field and coarse grids.
GUST reuses ERF components where they fit:
the Axell–Liungman k–L turbulence model;
the stretched terrain-following mesh with terrain smoothing;
the terrain Poisson solver;
the Monin–Obukhov surface layer.
The initial field comes from a mass-consistent model in the style of WindNinja, which follows FastWindTerrain.
Development status
Each solution method below adds speed to the one before.
Solution method |
Status |
|---|---|
Pseudo-time SIMPLEC with implicit vertical lines (z-line Jacobi) |
Complete |
Line LU-SGS sweeps, a horizontal grid hierarchy and grid sequencing |
In progress |
Jacobian-free Newton–Krylov, preconditioned by SIMPLEC |
In progress |
Nonlinear FAS multigrid, GPU tuning, validation and release |
Planned |
The production solver today is the SIMPLEC stage (Solution algorithm). The target machine is NLR Kestrel: CPU nodes with 104 Sapphire Rapids cores and GPU nodes with four NVIDIA H100.
Where to start
New users: build the code (Installation), then work through the tutorials, starting with Tutorial 1: A neutral surface layer.
Setting up your own case: How-to guides and the Input reference.
The model and the numerics: the Mathematical model and Numerical method sections below.
Accuracy and speed: Results and Performance and scaling.
Contents
Getting started
Tutorials
How-to guides and reference
- How-to guides
- Change an input from the command line
- Restart a run
- Use your own terrain
- Set the wind direction with inflow and outflow
- Choose the vertical grid
- Add stratification and a damping layer
- Add Coriolis forcing and a geostrophic wind
- Name the boundary-layer set-up
- Converge faster
- Fix a run that does not converge
- View and check the results
- Run on GPUs and on Kestrel
- Input reference
Mathematical model
Numerical method
Verification and validation